roller coaster wasn't quite erratic enough a description of this process.
i just called the hull dude, and i'm driving there this afternoon to pickout and pick up a hull. holy shit. that was the ladder to the finish line! i need to make a decision today. and with no daniel to consult, no dad to consult, its all on me to make the call. typical me, i've analyzed everything down to the projected gun time (if the refill pump doesn't work). i just gotta make the call.
by next update, i'll have a boat?
Monday, July 13, 2009
Sunday, July 12, 2009
roller coasters run on the sea
Hey guys (maybe theres 2 of you now, maybe colin is out there??.... but probably not).
came away significantly discouraged after the launch yesterday at jacks. problem was the same as it was the first jack launch, same as the sagan launch, same as way back in the kiddy pool. the drive of the screw can't be sustained by the rinky dink rig i've put together. i guess i'm just recapping, so i'll skim over the possible courses of actions: rigid motor shaft. gear the motor. well theres a new one. change the screw pitch. my dad suggested this one to change the load on the motor and gear without actually gear the motor. nifty idea. i'm ordering a slew of 3 dollar screws to try all sorts of combinations. it'll mean i need to devise some test rig - i can't disassemble the entire boat and slip on a new screw 5 times. its a sure fire 15 minutes of switching for 30 seconds of testing. can't do that. i'll have to build a holder for it to run on in the water and keep the electronics dry. its an interesting and onetime job.
i contacted the hull building guy and i need to make a decision soon. it'll help that conferring with dad has led to me purchasing a little submersible pump that should function to keep the holding tank sufficiently filled so i can use a littler hull. hopefully i can find the balls (or more likely stupidity) to just go buy the hull and fully commit myself.
came away significantly discouraged after the launch yesterday at jacks. problem was the same as it was the first jack launch, same as the sagan launch, same as way back in the kiddy pool. the drive of the screw can't be sustained by the rinky dink rig i've put together. i guess i'm just recapping, so i'll skim over the possible courses of actions: rigid motor shaft. gear the motor. well theres a new one. change the screw pitch. my dad suggested this one to change the load on the motor and gear without actually gear the motor. nifty idea. i'm ordering a slew of 3 dollar screws to try all sorts of combinations. it'll mean i need to devise some test rig - i can't disassemble the entire boat and slip on a new screw 5 times. its a sure fire 15 minutes of switching for 30 seconds of testing. can't do that. i'll have to build a holder for it to run on in the water and keep the electronics dry. its an interesting and onetime job.
i contacted the hull building guy and i need to make a decision soon. it'll help that conferring with dad has led to me purchasing a little submersible pump that should function to keep the holding tank sufficiently filled so i can use a littler hull. hopefully i can find the balls (or more likely stupidity) to just go buy the hull and fully commit myself.
Saturday, July 11, 2009
launch at jacks again
just got back from launching at jack's house again. nothing improved. i moved the rudder down so its mostly in the water but the travel is way way way too small to do much of anything. the same problem persisted with the drive. it just can't handle the motor spinnning fast at all. it fails at 4 or 5 notches of throttle. its the same as the first time we tested at jack's pool. so i don't think we've learned anything at all. its very discouraging. my dad suggested getting different pitched scews to put greater load on the motor and maybe slow down the spinning and push the boat more. its a good idea i suppose. and its the second to last resort before i have to go gear the whole thing. the last shot is to get a rigid motor and shaft and see if that works. i don't know, i'm discouraged. i have to order the real boat soon or there won't be any time to start work on it. but i don't know how big a boat to be getting. ARRRG!
Thursday, July 9, 2009
launch lesson 2
hey loyal followers (ha!)
good news and bad from yesterday's launch. it didn't sink. which is great news. but it also didn't exactly work either. the force of the prop dislodged the housing it was in and made the universal joint come off at slow speeds. the fix is to add a stopper to hold the prop housing in place. did that today. i'll reschedule pool time for tomorrow maybe.
good news and bad from yesterday's launch. it didn't sink. which is great news. but it also didn't exactly work either. the force of the prop dislodged the housing it was in and made the universal joint come off at slow speeds. the fix is to add a stopper to hold the prop housing in place. did that today. i'll reschedule pool time for tomorrow maybe.
Tuesday, July 7, 2009
subskate 2 ready for deployment!
great news: ready for testing tomorrow!
i finished the radio box, installed all the components (including a monitoring device "watt's up" to view the voltage, current, wattage, and amp-hours left) and installed some water shields for the electronics outside the radiobox.

while the water shields are not even remotely sufficient to keep the rudder servo and motor completely dry, it will prevent most of the splashing from getting to the electronics. if the boat starts going under, its all over, but i don't forsee that happening (fingers crossed).
heres a picture of the radio box with all the stuff inside it. like i said, its not fully waterproof - water is a tricky sob! however, i'm pretty happy with how it turned out. everything fits, connects well, and shaffer's idea of putting the connectors in the wall worked moderately well. because of how the wires are soldered, the connections don't go through the holes i made for them perfectly. they function, just not ideally. its mostly the same with the servo cable connector: i had a terrible time making a rectangular hole with a circular drill bit. I had to overshoot the mark and it means there's gaps around the connector. o well, i never saw this radio box being the permanent r-box.

I installed the turret servos in the brackets that came in yesterday and it looks like its going to work perfectly. the turret is going to be top heavy for sure, but i've been planning on streamlining the assembly for the final version (right now the pieces are 3 brass tubes (all cantilevered off the servo adding even more torque), 1 copper connecter, a wood piece, and the screws+nuts). in fact, when I plugged them in, the elevation servo was jumpy in a way that i haven't seen before. that being said, i've done the math, and the servo is rated strong enough to handle the assembly as it is right now. i'm not comfortable pushing it to the limit its at right now, but it'll do for now. here are some pictures of the turret's range of motion



for fun, at the end of the day (actually i worked at night today, but whatever), i put the two projects together. check it out. looks sorta like a battleship!!!!

(p.s. daniel i sent you a fb message, hopefully you check fb sometime before lunch tomorrow because thats when i'm calling ben. i can schedule the pool test whenever so if you have time after work, let me know asap so i can make the appointment then instead of earlier.
i finished the radio box, installed all the components (including a monitoring device "watt's up" to view the voltage, current, wattage, and amp-hours left) and installed some water shields for the electronics outside the radiobox.
while the water shields are not even remotely sufficient to keep the rudder servo and motor completely dry, it will prevent most of the splashing from getting to the electronics. if the boat starts going under, its all over, but i don't forsee that happening (fingers crossed).
heres a picture of the radio box with all the stuff inside it. like i said, its not fully waterproof - water is a tricky sob! however, i'm pretty happy with how it turned out. everything fits, connects well, and shaffer's idea of putting the connectors in the wall worked moderately well. because of how the wires are soldered, the connections don't go through the holes i made for them perfectly. they function, just not ideally. its mostly the same with the servo cable connector: i had a terrible time making a rectangular hole with a circular drill bit. I had to overshoot the mark and it means there's gaps around the connector. o well, i never saw this radio box being the permanent r-box.
I installed the turret servos in the brackets that came in yesterday and it looks like its going to work perfectly. the turret is going to be top heavy for sure, but i've been planning on streamlining the assembly for the final version (right now the pieces are 3 brass tubes (all cantilevered off the servo adding even more torque), 1 copper connecter, a wood piece, and the screws+nuts). in fact, when I plugged them in, the elevation servo was jumpy in a way that i haven't seen before. that being said, i've done the math, and the servo is rated strong enough to handle the assembly as it is right now. i'm not comfortable pushing it to the limit its at right now, but it'll do for now. here are some pictures of the turret's range of motion
for fun, at the end of the day (actually i worked at night today, but whatever), i put the two projects together. check it out. looks sorta like a battleship!!!!
(p.s. daniel i sent you a fb message, hopefully you check fb sometime before lunch tomorrow because thats when i'm calling ben. i can schedule the pool test whenever so if you have time after work, let me know asap so i can make the appointment then instead of earlier.
skate v2 half done
the second version of the subskate battleship is halfway done. i installed the rudder and tiller arm today and they work pretty well. it is a prototype so its not perfect, but its certainly functional. the radiobox parts got in late this evening so i'll finish that tomorrow and then be ready to go pool testing on wednesday probably. exciting stuff
Sunday, July 5, 2009
first parts in!
Hooray! i guess they delivered the first parts on thursday after daniel and i left because they were on the porch. these were the motor mount + rudder kit set of parts. I mounted the motor so now i can bring the motor up to virtually any throttle level i want (whereas before the missaligned motor shaft / screw shaft limited the throttle level to one or two notches [remember the physics talk from before?] ). thats a huge huge relief. worked most of the afternoon making that work because the adjustable mount goes 5 degrees too short for the adjustment that i needed (because of my inexperiance in laying out the drive shaft - i just didn't have any idea what angle to put it at, so i just guessed. and was wrong). eventually i solved the hiccup with a strategically placed shim and zip ties. motor is secured on the subskate!

then i went to work on the rudder. this is a REAL rudder! no epoxied junk. that was really nice because it lent nicely to keeping the rudder plum with the boat. it took maybe an hour to install the rudder nicely and then i realized the screw was in the way of the zip tie. brilliant (read frantic) thinking saved the day. i just added another block to offset where the ties went and then also rerouted the critical zip tie. so the rudder is on!

i started work mounting the rudder servo and was making slow but evident progress when i realized a roadblock. since the rudder is real-deal, its made out of actual steel. the problem is i need to drill into the steel rudder to atach the tiller arm (which, along with the push rod, is the mechanism that relays the rudder servo's motion). i've got the tools to do so, its just a bigger deal than drilling into something like balsa. it was 7 o'clock and i'm hungry and so i decided that was a good place to break before i lost focus and screwed something up.
once i secure the tiller arm onto the rudder, mount the rudder servo on the subskate, I'll have updated all the hardware that lays outside the radiobox. radiobox parts hopefully will come in tomorrow and then i'll spend tomorrow finishing everything inside the r-box and be ready for another test day on tuesday! wooooo doggie! getting exciting again!
then i went to work on the rudder. this is a REAL rudder! no epoxied junk. that was really nice because it lent nicely to keeping the rudder plum with the boat. it took maybe an hour to install the rudder nicely and then i realized the screw was in the way of the zip tie. brilliant (read frantic) thinking saved the day. i just added another block to offset where the ties went and then also rerouted the critical zip tie. so the rudder is on!
i started work mounting the rudder servo and was making slow but evident progress when i realized a roadblock. since the rudder is real-deal, its made out of actual steel. the problem is i need to drill into the steel rudder to atach the tiller arm (which, along with the push rod, is the mechanism that relays the rudder servo's motion). i've got the tools to do so, its just a bigger deal than drilling into something like balsa. it was 7 o'clock and i'm hungry and so i decided that was a good place to break before i lost focus and screwed something up.
once i secure the tiller arm onto the rudder, mount the rudder servo on the subskate, I'll have updated all the hardware that lays outside the radiobox. radiobox parts hopefully will come in tomorrow and then i'll spend tomorrow finishing everything inside the r-box and be ready for another test day on tuesday! wooooo doggie! getting exciting again!
Subscribe to:
Posts (Atom)