Thursday, July 23, 2009

another roadblock

again i can't get to work on the motor cause i seem to be missing a part. damn. instead i'm outfitting a mock up version of the boat to make sure everything fits together nicely

Wednesday, July 22, 2009

end of the day luck

DAMN!

i was all through building, putting it all back together for maybe the final time (prior to painting and installation) and murphy got me! my dad walked in to check it out and i'm putting the final touches on and i broke the second barrel and the piece i described yesterday (the one that i said was ridiculous but effective. it has gone through 2 more revisions and will now need a third one tomorrow).

GAH!!!

i'll finish the turret tomorrow and get to the motor installation cause now i can't procrastinate a day cause i just lost one.

Tuesday, July 21, 2009

two for one

wow, that was the first day i worked and didn't blog. pretty good streak for me

k, so, major turret progress today (mostly) and a little bit from yesterday. i built the housing for the turret and installed it all around the the elevation servo and azimuth servo as well. its going to be pretty sick. the bottom and backing are plastic so they're see-through but then i'm going to paint the top steel grey. you'll be able to sort of see into the turret if you're at the right angle, should be kinda cool.

i started to fit the barrels on the servo, when i realized it wouldn't fit. so i changed the attachment mechanism to a nifty block thats screwed onto the servo horn and then drilled through for the barrel to sit in. sneaky design that i have to pat my back for.


anyways, once that was fixed, i set about building the plate that would hold the dummy barrels (cause the water gun will only shoot out of one of the turret's barrels, the others are just for show). i figured out that ALso wouldn't fit, so i came up with a slightly more ridiculous fix and pushed on. you can see the fix a little bit in this picture. its a block of wood between the two barrels with a hose clamp attached to each. not the best way to support the second tube, but it works

the next thing that wouldn't fit was the servo bracket, so i dissasembled the whole system again. (each time i did this, both directions took maybe 4 or 5 minutes. and i did it maybe 4 times. the time adds up!) this time i had to file down the aluminum bracket which was a butt! but eventually it fit. and that was good :)

heres the whole assembly (minus the barrels) hidden away inside the turret housing that i spent the day building


for tomorrow, i need to cut slots from which the two barrels will poke out of the housing. gonna use a dremmel for that. next i'll make holes for the wiring and water-tubing to come through. then, its onto the motor. thats going to be a big big project. so i may stall and go find something else to be doing while i cower away from the mountain.

coming together nicely!

Sunday, July 19, 2009

another pothole... er... porthole

ran into another bump in the road. i don't have any of the schematics for rudder placement and stuffing tube / motor placement. gotta get that stuff from the dude before i can install the running gear. however he's gone for a week. and i've already been sitting around on him a week. so i was pissed all morning. my dad saved the day by cheering me up.

afterwards, I came to realize the sheer scope of the build. no way in hell i'm going to be able to make this thing into the gorgeous warship i was planning by the time tahoe rolls around. time to alter the course a little. basically i'm going to change the fittings above deck to fit things that i can do. also, i'll design it around the water-cannon. that way the important hardware more easily integrates with the aesthetics.

today i prototyped the turret shell and went and got parts for the secondary pump to feed into the holding tank. not much progress but my spirits are somewhat salvaged - overall a successful day considering.

Saturday, July 18, 2009

subdeck assembly

For the first day working on the new boat, I set to work on the subdeck. this is the part that the main deck rests on in the boat. the subdeck will be glued in place so the main deck can be put in and out easily.

basically building the subdeck entailed fitting the main deck with a trim all the way around that matched the contour of the inside of the hull. that way i could snugly place the assembly in the hull for glueing. the cutting of the pieces was a breeze but the matching took hours of sanding!

since i was only temporarily laying the subdeck on the main deck, i hardly glued it together and so had no stability or strength with which to sand against. while sanding the subdeck to fit the hull, i constantly dislodged the pieces and had to reglue them. what started out as a nice relaxing hour of sanding turned into a very thought intensive process. i had to visualize (without seeing) what parts must be hitting eachother and then remember where in order to go sand that area. but i had no clues except that the overall assembly didn't fit. from the picture you can see sort of what i went through, theres no line of sight to the subdeck or where it was too large to fit in the hull. it was almost a guess and check sort of deal.



believe it or not, building the subdeck took the WHOLE DAY! tomorrow i'll start spec'ing out the placement of the stuffing tubes, rudder, etc.

Friday, July 17, 2009

And so it begins

Well, i went ahead and bought a hull! butterflies fluttering up and down my back, i pressed the "pay" button and that was that. i was buying a hull.

and you know what? its a kick ass hull! i don't have any buyer's remorse yet. which is extremely exciting!

tomorrow i'll get up and get to work.

heres a shot of the hull next to the subskate prototype

Tuesday, July 14, 2009

i got a boat?

well, i've placed the boat order. should be ready by thursday or maybe friday. i got a hole flock of butterflies in my stomach - whether its big enough for the parts (which i believe it is), wether its small enough to fit in the car (which i'm sure it is), whether it'll fare ok against the tahoe conditions. i'm just all around nervous. but at least i made the call, and we're pushing forward. i'm gonna have a boat! theres no backing out now!

a couple of side notes: he's selling me a bilge pump he custom builds that may work as an all in one gun pump instead of the toy pump, we'll see.