Showing posts with label subdeck. Show all posts
Showing posts with label subdeck. Show all posts

Tuesday, August 18, 2009

system check 2 (minus the sinking)

the waves couldn't sink me this time. well, they could've, but i didn't let them!

i patched up the broken leads and resoldered everything, and ziptied all the wires to make it slightly less chaotic. take a look.

and, if you're not familiar with electronics projects, thats fairly clean. go back and check it out before, on the blog maybe like 4 or 5 days back.

k, so we got everything working and then we headed out to the lake. the first time we didn't get any photos. plus, another lead snapped off so i took it back, fixed it, then we headed back out. take a look.


woOOOooo! it works!! i'm so stoked!! i took it back in and this afternoon i've gotten to work on how the deck will connect. i'm going to epoxy these guys to the side of the hull then screw the deck into them.





i'll put rubber underneath so that it'll be mostly water tight. then the only way for water to get in is the place where the deck portions meet.

might be real launch tomorrow, might be thursday.


P.S. check out my dad's project.

so the story is, when i was little, we went fishing and we sat on the bank for hours, never even getting a bite! at the end, i asked him, in with my youthful innoncence, "why do they call it fishing? theres no fish involved." so, this time instead of randomly throwing in the line, he's taking an engineer's approach. he went out and got an underwater camera, and some camera (cyclops) glasses

so he's going to spot the fishes, then catch them. or thats the plan. today's update is that you can't really tell what you're looking at. its just blue in all directions. EXCEPT when you hit the camera on the bottom of the lake. then you see the sandy bottom. hehe. he'll get it working. and so will i!

Saturday, August 15, 2009

what does it laquer?

hey, new follower (pushes us up to a monstrocious four),

today took a change of plans. instead of installing everything, i decided it was more important to go seal all the wood so it would be mostly waterproof for installation than to do it afterwards. i'm supposed to wait 24 hours for the second coat, but i decided 3 was enough... hehe... watever, its just the pump bases so its not critical. the top decks and sub decks i'm going to wait out the appropriate time and thats both because its way more important and i can afford to wait cause the soonest i'll need the decks will be tomorrow evening. so if i laquer them tomorrow morning, i'll be somewhat good.

funny story about the laquering, i did it and then had no thinner to get it off my hands. so i had to wait half an hour with sticky hands while my dad got some thinner.

Friday, August 14, 2009

get ready for installation




hey guys!
so the sub pump is installed, i believe i told you that yesterday, but its now funcional! i went and tested the pumpage and it works well :)



also, i kept working on the bases for the various components. i bulit a holder for the rc reciever

i've laid out the whole interior so i'll start glueing in components tomorrow. after that i have to outfit the decks - install the subdecks, figure out how to secure the main decks, split them up, then put in the connectors and switches. all that is

Saturday, July 18, 2009

subdeck assembly

For the first day working on the new boat, I set to work on the subdeck. this is the part that the main deck rests on in the boat. the subdeck will be glued in place so the main deck can be put in and out easily.

basically building the subdeck entailed fitting the main deck with a trim all the way around that matched the contour of the inside of the hull. that way i could snugly place the assembly in the hull for glueing. the cutting of the pieces was a breeze but the matching took hours of sanding!

since i was only temporarily laying the subdeck on the main deck, i hardly glued it together and so had no stability or strength with which to sand against. while sanding the subdeck to fit the hull, i constantly dislodged the pieces and had to reglue them. what started out as a nice relaxing hour of sanding turned into a very thought intensive process. i had to visualize (without seeing) what parts must be hitting eachother and then remember where in order to go sand that area. but i had no clues except that the overall assembly didn't fit. from the picture you can see sort of what i went through, theres no line of sight to the subdeck or where it was too large to fit in the hull. it was almost a guess and check sort of deal.



believe it or not, building the subdeck took the WHOLE DAY! tomorrow i'll start spec'ing out the placement of the stuffing tubes, rudder, etc.